| Re: SRX Trailer Hitch
Here's a pic of the "official" GM trailer hitch for the SRX. Hitch is P/N 88961322. Wiring Harness is P/N 88963947. You need both. Install instructions are well written and not difficult. You will need to trim the fascia about 2 by 6 along the facsia bottom edge in the middle to make room for the hitch, which is not visible unless you are on the ground looking up. For reference, a 3-1/2 inch drop ball mount with a 2 in ball is 15 inch from the ball tip to the ground.
Don Marriott
Blue Chip/Neutral V8 AWD |