[01devilledts]

great how to, but you actually do not need to remove the window glass, just after you losten the 2 10mm bolts that pinch it into the glass, roll the window upwards and use some masking tape, and run about 4 strips from the inside up over the top and back down the outer piece... it sounds scary but it will hold, i promise... Also i have found a way to just fix the old one, so you will never have to replace the assembly when the plastic tab breaks again, TOTAL COST : free if you have a small piece of sheet metal lying around, let me know if any one would like to know how, i know those damn things are expencive...