5.0 and 5.7 Discussion, 1992 Brougham 305 Intake Manifold. in Cadillac Engine Discussion; I removed my intake manifold because it was leaking coolant at a couple of the coolant crossovers. If anyone is ...
- 05-23-06 04:16 PM #1Cadillac Owners Member
- Join Date
- Nov 2005
1992 Brougham 305 Intake Manifold.
I removed my intake manifold because it was leaking coolant at a couple of the coolant crossovers.
If anyone is knowledgeable about this job, I would like to know what holds the manifold gasket in place while the manifold is being installed. There don't seem to be any dowels or anything to hold the gaskets in the proper position while the manifold is being lowered into position.
Any comments or advice will be appreciated.
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Metric Hex Bits Set
Metric Hex Bits Set - 7 Piece; 3/8" Drive; Metric; Metric Hex Bits; Contains: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm & 10mm
- PowerTorque Tools - Long Reach Pliers
Long Reach Pliers - 11" Straight Long Reach Pliers
- PowerTorque Tools - 1/2" Dr Torque Wrench
1/2" Dr Torque Wrench - 1/2" Dr Torqute Wrench (18" handle, 10-150 Ft/Lbs)