2008-2013 Cadillac CTS Performance Mods Discussion, Actual exhaust size 3.6DI in Cadillac CTS Second Generation Forum - 2008-2013; I purchased some band style clamps in 2.25" to start some testing and modding to my exhaust. 2.25" will not ...
- 07-24-13 02:50 PM #1Cadillac Owners Member
- Automobile(s): 2010 cts4 loaded
- Join Date
- Jul 2012
Actual exhaust size 3.6DI
I purchased some band style clamps in 2.25" to start some testing and modding to my exhaust. 2.25" will not clamp down. I don't believe, contrary to popular belief that we have a 2.25" system on our cars. Unless Gm uses thinner walled pipe than normal. It was close but would not tighten up. I have now purchased 2" one and I will get a actual inside measurement when I cut it. Unless someone can enlighten me.
- 07-29-13 09:06 AM #2
2" exhaust on my '11 coupe
- 08-01-13 02:25 PM #3
Re: Actual exhaust size 3.6DI
That's what I thought. So was there some years that had a 2.25" or was that just guys measuring the outside of the pipe?
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Pliers
Pliers - 5 Inch; LockMore on PowerTorque Tools - Pliers
- PowerTorque Tools - Air Tool Kit
Air Tool Kit - 17 PieceMore on PowerTorque Tools - Air Tool Kit
- PowerTorque Tools - Metric Hex Bits Set
Metric Hex Bits Set - 7 Piece; 3/8" Drive; Metric; Metric Hex Bits; Contains: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm & 10mm