2004-2007 Cadillac CTS-V Performance Mods Discussion, TVS2300 on LS6 Heads??? in Cadillac CTS-V Series Forum - 2004 - 2007; I wanted to confirm that a TVS2300 can be used with stock LS6 heads? EDIT*** After some further searching and ...
- 04-05-13 01:49 PM #1
TVS2300 on LS6 Heads???
I wanted to confirm that a TVS2300 can be used with stock LS6 heads?
After some further searching and messagig DMM, it is the eforce that will work
- 04-05-13 02:45 PM #2Cadillac Owners Enthusiast
- Automobile(s): 2004 CTS-V Raven, StainlessWorks header back exhaust
- Join Date
- Jul 2012
- Wildomar, CA
I don't think it's so much the head as it is the other engine bay requirements. But I would also like to know for sure. Sub'd for answers
- 04-08-13 02:05 AM #3
Re: TVS2300 on LS6 Heads???
You can fit a SC on any heads as long as the angle is correct, most vehicles are at 15* while the LS7 is 12*.
You might as well make sure you have properly ported heads for it will be a waste if it wasnt, and get the GT9 cam from LPE, they showed the highest gain with the best idle on a 5.7 LS1 with ported LS6 heads...
+ Reply to Thread
Gear in this thread - Powered by O'Reilly Auto Parts
- PowerTorque Tools - Stubby Star Bits Socket Set
Stubby Star Bits Socket Set - 10 Piece; 1/4" & 3/8" Drive; Star Stubby Bit Socket Set; Contains: 1/4" Drive: T-10, T-15, T-20, T-25, T-27 & T-30,3/8" Drive: T-40, T-45,T-47 & T-50
- PowerTorque Tools - 1/2" Dr Torque Wrench
1/2" Dr Torque Wrench - 1/2" Dr Torqute Wrench (18" handle, 10-150 Ft/Lbs)
- PowerTorque Tools - Tool Bag
Tool Bag - 15 InchMore on PowerTorque Tools - Tool Bag