Harrop Superchargers

Steve@SNL/Monster · #1 (**permalink**) 09-02-09, 08:18 PM

Hello all,

I've been in contact with Harrop Engineering via my performance shop SNL Performance and we are in the midst of assisting them with designing some blower setups for vehicles here in the states. This is what they already offer for us out here;

2004-2006 GTO
2008-present G8
Cobalt
Hummer H3

We are currently helping them with the development of the following kits;

GMT900 trucks
C5 Corvette
C6 Corvette
Possibly the CTS-V
2010 Camaro

If you guys would be interested in a blower for your vehicles let me know and I'll get in touch with them on it. The superchargers that we would be offering is the Harrop HTV1900 and the HTV2300 for the guys with the big cubed setups. I'd like to see you guys get a little more support from the aftermarket, I'll do anything I can to see that come to light.

Steve Addison
SNL Performance/Monster Clutch Co.
817-750-2000

deedubb · #2 (**permalink**) 09-02-09, 09:20 PM

Interested to see more options....although I just bought a Maggie for mine

stuckey · #3 (**permalink**) 09-02-09, 09:23 PM

donate your maggie to me then donate your car to harrop for the new setup and maybe they'll give it to you for FREE you could just write it off on your taxes or something lol

rand49er · #4 (**permalink**) 09-02-09, 10:02 PM

Once you go FI, you don't go back. Just amazing ...

whisler151 · #5 (**permalink**) 09-02-09, 10:10 PM

Quote:

Originally Posted by rand49er

Once you go FI, you don't go back. Just amazing ...

I'm scurred...a nice size cam should do me fine.

deedubb · #6 (**permalink**) 09-02-09, 10:15 PM

Quote:

Originally Posted by whisler151

I'm scurred...a nice size cam should do me fine.

First time I've ever heard a fellow Marine say that.

dannboss · #7 (**permalink**) 09-02-09, 11:33 PM

I have actually heard of a Harrop supercharged LS7 putting out 825 at the crank. I believe it was the 2300 for a 427. Don't recall the car itself, but think it was a Holden something or other.

As a spectator, I am curious to see what comes of this project. Isn't their supercharger something like 9-10k?

maxspeed96ct · #8 (**permalink**) 09-02-09, 11:38 PM

Id like to see more options, as long as its competitively priced with the maggie.

Would be a good thing.

kpc01 · #9 (**permalink**) 09-03-09, 12:25 AM

I am in DFW so if you need to see a car to get some measurements let me know. Its been sitting for the last month anyways. IF you decide you need a guinea pig to use to design let me know. Its an 04 V with cam, ported heads and full exhaust. is this a roots style or cent?

kpc01 · #10 (**permalink**) 09-03-09, 12:31 AM

just looked them up and see they are roots style blowers....at any rate, if you need one to look over let me know, I need to tear it back down anyways to replace the lifters

GFORCE1320 · #11 (**permalink**) 09-03-09, 04:54 PM

This is great news!

The Harrop stuff is top shelf in my opinion. Great quality parts.

onebadcad · #12 (**permalink**) 09-04-09, 03:54 PM

Just viewed their sites, looks like they are Eaton-sourced roots-style blowers---are they better than the Magnuson TVS 1900 and TVS 2300, and if so, in what ways. Also did the currency conversion from $12,650 AUS to USD and is $10,800. At $10,800 I do not think they have a market niche, unless my math sucks and these units are revolutionary.

SoJersey05V · #13 (**permalink**) 09-05-09, 07:25 PM

hmmm... maybe someday.. but not for a pricetag like that?!?!?!?