Traction Kit Group Buy info "Upgraded KARS Stage III Kit" - Page 21

csp3000 · #**301** (**permalink**) 09-23-08, 06:37 PM

Hi everyone...

I am working with a local V owner to see if we can get a install vid of the traction kit as well as some videos of runs of different rpm drops to show results. I will know the answer by the latest Friday.

Best,
Chris
561 MotorWerks
chris@561motorwerks.com
561-319-6665

Den_93 · #**302** (**permalink**) 09-23-08, 11:53 PM

Mine works, I dumped it at 3k and 4k and no wheel hop just bald rear tires. I also tried it in the water with very little wheel hop (I mean very litttle, almost not noticable). There was some added noise to the interior, but it wasn't bad, maybe a 1-2 on a scale of 1-10, 10 being loud. The noise level was dependent on what type of roads I was driving on (black top=no noise, cement highway w/ grooves=noise). Going to the track tomorrow, so I will try to get some videos.

csp3000 · #**303** (**permalink**) 09-24-08, 12:55 AM

Quote:

Originally Posted by Den_93

Mine works, I dumped it at 3k and 4k and no wheel hop just bald rear tires. I also tried it in the water with very little wheel hop (I mean very litttle, almost not noticable). There was some added noise to the interior, but it wasn't bad, maybe a 1-2 on a scale of 1-10, 10 being loud. The noise level was dependent on what type of roads I was driving on (black top=no noise, cement highway w/ grooves=noise). Going to the track tomorrow, so I will try to get some videos.

Thanks for the great write up....

Cant wait to see some videos!!!

Best,
Chris
561 MotorWerks
chris@561motorwerks.com
561-319-6665

urbanski · #**304** (**permalink**) 09-24-08, 12:28 PM

mary wanted to post these

all i can say.....errol is scary

urbanski · #**305** (**permalink**) 09-24-08, 12:30 PM

teh grate mary

mary@tps · #**306** (**permalink**) 09-24-08, 12:35 PM

urb, your fingers are tripping over one another...heehee

CTSV05 · #**307** (**permalink**) 09-24-08, 11:29 PM

Quote:

Originally Posted by tlsmeds

Has anyone ran Specter Werkes bushings and then installed a KARS kit? Did it help wheel hop more than just with the bushings?

I have the bushings now and get very little wheel hop but if it is going to help protect the rear end even more, I might be in for a kit.

No, but I had the GM bushings...for those who remember that attempt to quelch the hop, and there was a big difference with My kit.

Dont forget now, MUCH of the hop depends on your personal driving habits, when I invented the kit, I had numerous folks here claim they hadnt suffered any hop, so I would advise that you all keep in mind individual drivers and cars as well.

I had much worse hop at part throttle launches than just clutch dumping too, as well as the shift points.

suppercaddy1 · #**308** (**permalink**) 09-26-08, 12:27 AM

i went to the track on wedensday nite for a test and tune nite i feel some wheel hop,but its not bad of a hop,so whit the kit u will have some little wheel hop,but still this is my best upgrade i did for my v,my traction is better
the car hooks hard ,thats all i have to said about this kit

jweymar · #**309** (**permalink**) 09-26-08, 01:32 AM

Quote:

Originally Posted by suppercaddy1

i went to the track on wedensday nite for a test and tune nite i feel some wheel hop,but its not bad of a hop,so whit the kit u will have some little wheel hop,but still this is my best upgrade i did for my v,my traction is better
the car hooks hard ,thats all i have to said about this kit

What other mods do you have?

lollygagger8 · #**310** (**permalink**) 09-26-08, 10:30 AM

Quote:

Originally Posted by suppercaddy1

i went to the track on wedensday nite for a test and tune nite i feel some wheel hop,but its not bad of a hop,so whit the kit u will have some little wheel hop,but still this is my best upgrade i did for my v,my traction is better
the car hooks hard ,thats all i have to said about this kit

WE NEED VIDEO!!!

n2ojunky · #**311** (**permalink**) 09-29-08, 11:05 PM

any word yet???? Are there enough to start the next batch??? I really need this kit ASAP!!!

Errol @ TPS · #**312** (**permalink**) 09-30-08, 08:43 AM

I think we need a couple more confirmed orders to make another batch.

Quote:

Originally Posted by n2ojunky

any word yet???? Are there enough to start the next batch??? I really need this kit ASAP!!!

lollygagger8 · #**313** (**permalink**) 09-30-08, 09:47 AM

Weeeeee neeeeeeeeeeddddd videeeeeooooos pllleeeeeeeeaasseeee

c4ss · #**314** (**permalink**) 09-30-08, 02:28 PM

Quote:

Originally Posted by n2ojunky

any word yet???? Are there enough to start the next batch??? I really need this kit ASAP!!!

I didnt read the rest of this thread, but what would the total cost be shipped? This is the stage 3 kit right? I've been looking into these and heard they're better then the BMR one. I'll probably be in for a kit though. How many more are needed for this batch?

csp3000 · #**315** (**permalink**) 09-30-08, 02:52 PM

Ok here is the deal. I believe I have 10 orders for the next batch. I will be contacting each of you to get deposits for the 561 MotorWerks Traction Kit. c4ss I have received your email and i will be contacting you today or tomorrow the latest. Btw you were the 10 person so you made it.