Asanti, HRE, CCW, wheel thread(Let's see what wheels the V looks best on).

[vettethret]

Originally Posted by onebadcad

295r PS2s are the best, and most expensive, choice...

That looks sick. Any rubbing with the 295's? I am getting ready to order 285 bfg kdw2s.

[onebadcad]

No rubbing under normal conditions, there is some rubbing under the following conditions:
1) when both of my 600-lb sister-in-laws 'fill out' the back seat
2) when my delinquent buddy picks up a rental honey on the boulevard

The motor's power still allows for rolling burnouts in second gear, and sometimes in third gear.

BTW, is the guy who crushes every car in street races really going after your Snake, I would like some action on that bet.

[vettethret]

Originally Posted by onebadcad

No rubbing under normal conditions, there is some rubbing under the following conditions:
1) when both of my 600-lb sister-in-laws 'fill out' the back seat
2) when my delinquent buddy picks up a rental honey on the boulevard

The motor's power still allows for rolling burnouts in second gear, and sometimes in third gear.

BTW, is the guy who crushes every car in street races really going after your Snake, I would like some action on that bet.

That's funny about the sister n law, I can relate, just got married. Ya, I'm waiting for the waco kid to answer the challenge, I'll take him to a real track so can shi$ all over himself in turn one!

[onebadcad]

Originally Posted by vettethret

That's funny about the sister n law, I can relate, just got married. Ya, I'm waiting for the waco kid to answer the challenge, I'll take him to a real track so can shi$ all over himself in turn one!

Did your ever visit ViperAlley.com, those guys are brutal, they bash everyone including vendors.
I, too, am in the MB business, its ugly right now, hoping FHA is the answer, as too many lenders are either packing it in, or killing me with LTV reductions and rate hikes. I have seen tough times in the early 90's, but this looks like it may get worse.

[Chef]

Since we're flashin' arrrrses....old snap...new ones to follow in the near future.

[vettethret]

Originally Posted by onebadcad

Did your ever visit ViperAlley.com, those guys are brutal, they bash everyone including vendors.
I, too, am in the MB business, its ugly right now, hoping FHA is the answer, as too many lenders are either packing it in, or killing me with LTV reductions and rate hikes. I have seen tough times in the early 90's, but this looks like it may get worse.

I'm getting 750 fico, 80%ltv, cash out declines right now. I've been in it since 97 and have never seen anything like it. I wanted to drive the viper into the Pacific on the way home last Thursday! 3 loans at funding last week for a total of 50k in rev GONE because ABC Counduit went out of business! That was an expensive day. over!

[vettethret]

Originally Posted by Chef

Since we're flashin' arrrrses....old snap...new ones to follow in the near future.

Bad ass as usual!

[onebadcad]

Originally Posted by vettethret

I'm getting 750 fico, 80%ltv, cash out declines right now. I've been in it since 97 and have never seen anything like it. I wanted to drive the viper into the Pacific on the way home last Thursday! 3 loans at funding last week for a total of 50k in rev GONE because ABC Counduit went out of business! That was an expensive day. over!

Thankfully I had no loans in the pipe with ABC, but New Century screwed me on five loans in rescission three months ago, of which three were never able to close. Looks like the wifey may have to start taking a few shifts at the hospital-man, oh man, is she going to be pissed!

[onebadcad]

Originally Posted by Chef

Since we're flashin' arrrrses....old snap...new ones to follow in the near future.

Chef,
Looks like you need to go with a flare kit and 325-345s in the rear given your power.
... and don't give up on the V, I have been through some tough times with mine, but after such I grow fonder and realize that unloading her would be a surrender. The V has issues, but I can get through them, as on a good day no other comes close. Good luck to you my brother, you will endure!!!

[ssmith100]

MY 295's rubbed on hard dips, but that was it. I was running positive camber though because I didn't like the way they towed in at the top. Running 275's now.

Shane

[AAIIIC]

Originally Posted by ssmith100

I was running positive camber though because I didn't like the way they towed in at the top.

You actually preferred having the tires leaning out at the top? Can't say I've ever seen that before.

Originally Posted by IgotmeaV

i just got a quote from CCW for staggered 19x8.5 and 19x10 SP20's ... 2600 bucks

Huh, they quoted me the same for 18" C14s. I woulda thunk 19s would be more expensive. Maybe I should just cave and get the 19" SP600s if they're gonna be $2600, too.

[badcaddy]

It has been really difficult to find 20's with a 6X115 bolt pattern which will clear the rear calipers. I ordered some 20 X 8.5's from Zinik for my '07 V - they guaranteed fitment(by phone and on website). The front fit, the back would not clear. Spacers are potentially a little risky from my standpoint, so I sent them back. D'Vinci has supposedly guaranteed fitment on a set of staggered rims (Ventos) with different offsets in the front and rear. Rubber? 245/35 on the front and 255/30 on the back. We shall see....I should get delivery next week.....what a frustrating experience to try to find wheels with a 6X115 that will clear the badboy Brembos.

[theloanman219]

Originally Posted by badcaddy

It has been really difficult to find 20's with a 6X115 bolt pattern which will clear the rear calipers. I ordered some 20 X 8.5's from Zinik for my '07 V - they guaranteed fitment(by phone and on website). The front fit, the back would not clear. Spacers are potentially a little risky from my standpoint, so I sent them back. D'Vinci has supposedly guaranteed fitment on a set of staggered rims (Ventos) with different offsets in the front and rear. Rubber? 245/35 on the front and 255/30 on the back. We shall see....I should get delivery next week.....what a frustrating experience to try to find wheels with a 6X115 that will clear the badboy Brembos.

I have Dvinci DV50. They said that those are the only ones that fit the car. I did have to use small spacers in the back though. I wanted Staggered but ended up with just 9" all the way around. Not sure if you say the pic on how they look.

[Chef]

Chef,
Looks like you need to go with a flare kit and 325-345s in the rear given your power.
... and don't give up on the V, I have been through some tough times with mine, but after such I grow fonder and realize that unloading her would be a surrender. The V has issues, but I can get through them, as on a good day no other comes close. Good luck to you my brother, you will endure!!!

Solid feed as usual onebadcad! You're right. Plus I have a new hat that just got sprayed for close to 7 clams (pick it up in a week)...p.s. - it has a v logo on it and my name so I have to finish what I started..

On the flares - I'm going to cut the fronts and blend them in to fit at least 275's in all 4 corners to start.

[blow03ss]

Does anyone have any info on the Black V with the Asanti wheels on it, its on the first page of this thread. Who's car is that? What lowering kit is on it? Ground Control, or just springs? That damn car is perfect. Anyway just looking for the owner of info.