Quote:
Originally Posted by wongie  ok... finally some great instructions! was able to remove the panel and replace the window motor, 3 bolts holding the motor down and 1 electrical connector, if the gears dont align up, you have to reconect the window switch and play with it until the gears line-up.
the only detail that was not mentioned above was there is a philips screw on the bottom left courner behind the door pocket... i found it when I pulled the panel off and broke it off the post.
most important... PULL UP first! |
Thad phillips screw is in a green plastic insert that comes out of the door, you should not need to take the screw out.
The pull up part is the key.