| Re: Help, question about clearing fog light
There is an alumiunum divider in the fog housing. You can pull it out and cut it with sizzors. You need to remove about 1/2". Some guys remove the divider altogether but that may not seperate the beam when you have your fogs on with your turn signals. I hope that is the metal you are talking about. There is also the black box around or in front of each bulb, leave those on or you will not get an even light distribution.
Note, the silver coating in the housing is very fragile, be careful not to scratch it off, mine literally came off with my finger rubbing on it.
Last edited by Sammy Z; 07-03-09 at 07:22 AM.
|