4) Take lid off airbox:
The right side of the airbox has clips that slide into a lip on the bottom part of the airbox.
5) Take the bottom part of the airbox out of the car:
6) Take scoop out of bottom part of airbox:
7) Use a Dremel tool and remove bottom half of the bottom part of the airbox:
8) All done now put it back together.
Conclusion:
The mod is simple and the Dremel cuts through the plastic very easy. Install took 30 minutes. You can definately hear the SC whine when you get on it but it is still mild. Personally I think it is perfect balance, not to loud and not too quiet like stock. When you nail the throttle cars around you will know your blown
Thanks Jess (WAIT4ME) for sharing the mod.