[Lu Scola]

***UPDATE***

I actually forgot about that. I didnt have time to cut a new piece of wood. That piece was too short and I was going out to dinner tonight so I didnt have time to re-do it. I have about a half hour of work left on the face of the wall, and add the screw caps then it will e complete.


THE BED:

As for the bed I am enclosing the back side of the wall. There will be a 26 inch HDTV in the center with two 8" inch screens mounted caddy-corner, one on each side (3 screens built in the back wall). There will be side panel walls on the sides of the bed wrapped in black leather like the face of the wall. There will be plexi-glass windows on each side in the middle of the side walls lit up with neon LED's. I will have a amp on each side inside the windows. There will be two more plexi-glass windows in the side walls that are positioned more towards the tailgate. Inside the windows on each side will be neon lit with one "floating" Cadillac Emblem inside each window.

THE BED FLOOR:

I have the subfloor already laid down for the hard wood floor in the bed. I poly-urathaned the wood with a high gloss shine kinda like a NBA Basketball Court. They will look awesome with the neons shining and reflecting off the floor. I should have this completed in the next week or two.


Next Project:

Next I am going to remove the passenger airbag and the cover and make a factory looking cover, with a X-Box 360 Elite built into it.

I also am going to install a 10.4 inch monitor under the hood built into a nice fiberglass frame


Dolphins beat the Ravens.......LOL!!!! Chad Pennington is not ready for that Baltimore Defense.