Quote:
Originally Posted by jayoldschool  Well, it is free to look at the linkage 
Check it out, and try to figure out if it is sticking. Look right down the throat of the carb to see if the blades are staying a little open. Do you have any WD40 or anything like that? That will work, too (just not as well). Carb cleaner is around 5 bucks.
A place like Autozone can likely loan you the tool to hook up to check timing/idle speed  |
Hmm, Well what exactly is the linkage?
I took off the cleaner and disconnected the hoses etc. but everything seemed good in there... I touched those two small blades open and they close right back up no problem... It seems pretty clean in there... i didnt really know what to look for... lol