Saweeet! I have a product named after me :P
So, I figured I would post a quick update... I have taken lots of pictures, but until I get this permanently mounted, they aren't going to do any good.
Basically, I tore my car apart, taking the rear bottom and top seats out, and the lining out of the top and back of the trunk. I found a harness that I thought was like the one I was looking for, but it ended up not working. I have a car that has Bose in it, so cars with out Bose will work, but not using the same harnesses I am.
I am using a connector on the amp for the bluetooth. It has class2 and telephone audio on it. Basically, connect the class 2 purple wire to one of the purple wires in the connector, and then connect the line level out positive and negative from the bluetooth kit to the positive and negative audio wires on the harness. The low level mute from the hands free kit needs to connect to the yellow wire on the HyperSTAR board. The hands free kit needs to be connected following your user instructions, but I am using a Motorola T605 Wireless Stereo/Car Kit, so I have my 12v+ from the HyperSTAR board connected to the Ignition sense on the t605. I have the ground connected in the same harness as well. Now the only issue I am having is getting the low level mute from the t605 to work. I can't find my multimeter, so I haven't a clue what is going on.
Now, I know the kit works, because I ground the mute wire, make a call, and it comes through the front tweeters. The volume is controlled on the bluetooth kit. There is no need to go to the dealer to have the hands free kit enabled.
This is going to get edited, and I will post pictures when I am done, but I wanted to get my results up. I work tomorrow night, so I am going to spend the night putting my car back together. After taking everything apart, the kit is quite simple to install, once I found a harness I could use.
Attached is a screen shot of the harness I used.
RustyBlazerDude, you totally rock, and thank you for making this, and sending one to me to test.
HySt_Con.png