Quote:
Originally Posted by CadillacSTS2003  quick ? and i noticed this as well
which of the plugs does your kit plug into
i have dug into it yet so please excuse my ignorance but the connector with the kit you sent looks like a connector for a splice pack not a connector for either of the 32 pin plugs on the vcim box (where i assumed you were tapping in)
is the splice pack where this plugs into higher up where the 2 32 pins branch off from? |
There is a small harness (see pic below) which has 4 connectors on it. The RED and BLUE connectors, go to the VCIM, there is a DB25 that goes to the cellular communicator, and this whole thing ties into the vehicle with the splice pack connector. So as I mentioned a while back, you need to remove this harness, and plug my harness in its place. Mine was located in the trunk.
Using the splice connector makes for a real simple, and reliable install. Hopefully, this will be common among several models, if not, i will have to make different harnesses. If anyone out there can do a reverse lookup on this harness and tell me what vehicles it was used in, I would know which vehicles this kit would drop right in as is. There might even be a free unit in it for you !!!
The appearance will be even better once manufactured by machines. These boards were all hand soldered and the cables were all hand crimped. I'll have them made by a contract manufacturer if there is sufficient demand.