| Re: Advice on what to do to resolve codes
A bad pump will not produce codes. At this point you need to perform some basic checks.
I'd start with fuel pressure. Do you have (or can you get) a fuel pressure gage?
I think you should see about 45 psi with the pump running (while cranking).
You sure the car has gas in it? Sometimes the gage can be messed up and make you think you have gas when you don't. In either of those cases it would be time to drop the fuel tank to fix it.
Next would be checking for spark, any parts store will have an ST-125 spark tester. Those are made to check GM HEI systems. An easy task on that engine.
__________________
Views expressed by the author of this post do not necessarily represent those of the Lindsay Automotive Group. |