Quote:
Originally Posted by Raze  AJ question if you have a chance, since my block was timeserted already and i have to pull the front head due to that foreign object jamming open one of my intake valves which may have gotten slapped by the piston, what are the chances I'm going to strip out those inserts? What's the clearance between the piston and the intake valves or is it a straight up interference engine?
Thanks... |
I missed this.
I did a similar job last summer. The valve face and seats were beat up. That was it. You will find out if the TimeSerts stay in place, pull out
, unscrew, or the worst partially unscrew
